QSC RMX850 Professional Power Amplifier for sale in Blackwood, NJ
Pre-Owned, In Excellent ConditionThe RMX 850 is a member of QSC's enduringly successful RMX line of power amplifiers, renowned for their widespread popularity. This particular model delivers 200 watts per channel at 8 ohms, and an impressive 830 watts when bridged at 4 ohms.Continuous Output Wattage:8 ohms: 200W4 ohms: 300W2 ohms: 430W8 ohms Bridge Mono: 600W4 ohms Bridge Mono: 830WSignal to Noise (20 Hz-20 kHz): 100 dBDistortion (SMPTE-IM): Less than 0.01%Input Sensitivity @ 8 ohms: 1.15v (+3.4 dBu)Voltage Gain: 31.6x (30 dB)Output Circuitry: ABCurrent Consumption (1/8 power pink noise at 4 ohms @ 120VAC,both channels driven; multiply current by .5 for 230V units.): 5AWeight (Net): 35 lbs. (15.9 kg)Distortion (typical):20 Hz-20 kHz: 10 dB below rated power: Less than 0.03% THD 4 and 8 ohms1.0 kHz and below: full rated power: Less than 0.03% THD 4 and 8 ohmsFrequency Response:20 Hz-20 kHz, 0/-1 dB, -3 dB points: 5 Hz-50 kHzDamping Factor (1 kHz and below): Greater than 300 at 8 ohmsInput Impedance: 10 K ohms unbalanced, 20 K ohms balancedInput Clipping: 10 Vrms (+22dBu)Cooling: Continuously variable speed fan, rear-to-front air flowConnectors (each channel):Input: Active balanced; barrier strip, XLR, and 1/4 in. (6.3 mm)TRS tip and XLR pin 2 positiveOutput: "Touch-proof" binding posts and Neutrik SpeakonControls:Front: AC switch, Ch. 1, and Ch. 2 gain knobsRear: 10-position DIP switchIndicators:PWR-ON: Green LED SIGNAL: Yellow LED (1 per channel)CLIP: Red LED (1 per channel)Amplifier Protection: Full short circuit, open circuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads.Load Protection: Turn-on/off muting, AC coupling (850, 1450), triac crowbar (2450, on each channel)Dimensions:19 in. (48.3 cm) rack mounting, 3.5 in. (8.9 cm) tall (2 rack spaces),15.9 in. (40 cm) deep (rack mounting to rear support ears)Power Requirements: 100, 120, 230 VAC, 50-60 Hz
|
|
 |